When using the In-canvas command prompt the following commands can be typed directly in the AVEVA E3D Model module :
| Command | Description |
|---|---|
| AIDARC | Invokes function to create AID type Arc |
| AIDBIS | Invokes function to create an AIDLIN bisecting between two non-parallel AIDLINs |
| AIDCIR | Invokes function to create AID type Circle |
| AIDFIL | Invokes function to create filleting AIDARC connecting two non-parallel AIDLINs |
| AIDLIN or L | Invokes function to create AID type Line |
| AIDPOI | Invokes function to create AID type Point |
| AIDTAN | Invokes function to create an AIDLIN tangential to two circles which are non-concentric |
| AIDTEXT | Invokes function to create AID type Text |
| ANGLE | To calculate angle between any two entities |
| AREA | To create area arrangement |
| BRACING | To specify bracing gaps for existing diagonal elements or members |
| CAMERA | Enables to lock view wrt an object. Also disables 3D orbit mode when it is enabled |
| CANCEL | Cancels any current operation in-progress |
| CO or COPY | Invokes function to copy selected entities with respect to a base point selected and also paste them at required locations in a loop |
| COPYBASE | Invokes function to copy selected entities with respect to a base point selected |
| COPYCLIP | Invokes function to copy selected entities without any base point |
| CONNECT | Enables function to connect any two GENSECs |
| CUTBASE | Invokes function to CUT/PASTE selected entities with respect to a base point selected |
| CUTCLIP | Invokes function to CUT/PASTE selected entities |
| CURVE | To create curve from plane |
| D or LINDIM | Invokes function to create db type Linear Dimension |
| DECKS | To create decks |
| DELETE | To delete selected entities |
| DISCONNECT | Enables function to disconnect any two connected GENSECs |
| DIST or DI | To calculate distance between any two entities |
| EM or EDITMODE | Triggers Edit Mode |
| ENDATUM | Create an ENDATU Fixing at selected End of GENSEC. Specs can be set only for old BS Column and Beam type profiles |
| EXTEND | Enables function to extend the end of a structural element to a reference element. |
| FILLET | To create a Fillet between two non-connected structural elements |
| FLY | Enable FLY mode operation |
| FORCETRIM | To trim an attached GENSEC to selective Pline of Owning GENSEC |
| FOVY | Enables option to enter new Vertical field-of-view angle(Projection mode should be in Perspective to enable this option) |
| GENSECDEF | Triggers function to set default specification wrt. existing GENSEC |
| GFITT_CRE | Enable function to create a GENSEC Fitting |
| GFITT_MOD | Enable function to modify a GENSEC Fitting |
| GRIDCY | Invokes function to create a new GRID CYLINCER for Radial Grid only in In-Mode |
| GRIDID | Resets IDs of REFGRDs |
| GRIDPL | Invokes function to create a new GRID PLANE for REFGRD in IN-Mode(Currently works for a single REFGRD) |
| ID | Queries Coordinate Positions at snapped position |
| IN | Triggers IN or Include mode |
| JMOD | Enables user to modify joints on a SECTION |
| LCS | Invokes operation to change Coordinate system between Local and World |
| LINDIMA | Invokes function to create db type Aligned Dimensions |
| LOOKROUND | Enables 3D Orbit mode option to look around a locked view in Perspective ProjMode |
| M or MOVE | Invokes function to move entities with respect to a base point selected and also paste them at required locations in a loop |
| MERGE | To merge two members of same element type |
| MI or MIRROR | To mirror any selected Structural Elements by defining a Mirror Plane |
| MITRE | Enables option to Mitre two ends of GENSECs |
| MLABEL | Invokes a function that creates a Label in 3D Canvas |
| MREDO | Enables user to REDO all previous actions or to desired no. of actions |
| NEXT | To go Forwards through Views |
| OUT | Trigger OUT mode by exiting IN mode |
| OUTALL | takes user all the way out |
| OSNAPD | Triggers Distance Snap Mode function |
| P or PAN | Enables REALTIME PAN option |
| PANARC | Enables function to Create a ARC PANEL using three point or two point methods |
| PANCIRC | Enables function to Create a CIRCULAR PANEL with multiple options |
| PANDIR | Pans View towards selected PLAN VIEW directions |
| PANDISC | Enables function to Create a DISC PANEL using Centre+ or two point methods |
| PANELSURF | To create panel from surface |
| PANELPLANAR | To create pane from grid plane |
| PANELNXTRDISC | Creates a Negative extrusion of a PANEL in Circular Shape in 3 different Modes |
| PANELNXTRMULT | Creates a Negative extrusion of a PANEL in Rectangular Shape using Multiple Points |
| PANELNXTRRECT | Creates a Negative extrusion of a PANEL in Rectangular Shape using Two Points |
| PANMULT | Enables function to Create a RECTANGULAR PANEL with multiple points |
| PANOFFSET | Enables function to Create a an Offset Perimeter of PANEL with multiple points |
| PANRECT | Enables function to Create a RECTANGULAR PANEL using two points |
| PANRING | Enables function to Create a RING PANEL using three point to two point methods |
| PASTECLIP | To paste any copied or cut elements that are available in current session |
| PFITT_CRE | Enable function to create a PANEL Fitting |
| PFITT_MOD | Enable function to modify a PANEL Fitting |
| PL or PLINE | Enables function to create a Polyline |
| PLAN | Set the current View to Plan View mode |
| PR or PROPERTIES | Open Property Window if not opened already in the application |
| PREV | To go Back through Views |
| PROJMODE | Toggles between Projection modes Orthogonal or Perspective |
| RADIAL | Enables option to create a Radial Grid |
| REDO | Redo any operation that was previously called back(Performed Undo) |
| REFGRD | Enables option to create a Reference Grid |
| RO or ROTATE | Invokes function to rotate any object around any defined axis |
| SCALE | To Scale a Structural Element by selecting a Base Point |
| SECARC | Creates an ARC GENSEC and also gives multiple options to choose the way they are created |
| SECCUR | Creates a Curved GENSEC and also gives multiple options to choose the way they are created |
| SECRING | Creates a RING GENSEC and also gives multiple options to choose the way they are created |
| SECTION | Creates a Straight GENSEC and gives multiple options to choose the way they are created |
| SELALL | To select all the elements in 3D View |
| SPLICE | To Splice any Structural Element(s) in multiple ways |
| SPLIT | To split any Structural Element(s) in multiple ways |
| STRETCH | To Stretch any Structural Element along a defined path |
| SURFACE | To create Surface |
| SPACE | To create space arrangement |
| TOWER | Enables option to create a Rectangular Tower Grid |
| TOWERT | Enables option to create a Triangular Tower Grid |
| U | To Undo any current operation |
| UNDO | Enables user to UNDO all operation or to desired no. of counts |
| WALK | Enables user to WALK around a Model |
| Z or ZOOM | Enables Zoom options |
| -VIEW or -V | To change any View between Isometric or Orthographic or Plan View |
| -PAN or -P | PANs view wrt base point selection |
| 3DO or 3DORBIT | Enables 3D Orbit mode |
